Avatar
http://www.angelcool.net/tutorials/cisc ... _EIGRP.pdf
[ view entry ] ( 1889 views ) | print article
A GRE tunnel can be set up to use the Internet as a point-to-point link, thus dynamic routing can be enabled between two remote locations.
http://www.angelcool.net/tutorials/cisc ... ration.pdf
[ view entry ] ( 1901 views ) | print article
Frame Relay hub-n-spoke layout with 2 PVCs. Each PVC in different subnets. Demonstrates RIPv2, OSPF and EIGRP configurations.
PDF:
http://www.angelcool.net/tutorials/cisc ... SUBNET.pdf
[ view entry ] ( 1642 views ) | print article
This tutorial shows how to get basic information(such as network number and first IP address) given an IP/subnet-mask address.
See related link or go to:
http://www.angelcool.net/tutorials/cisc ... d_Mask.pdf
[ view entry ] ( 1402 views ) | print article | related link
This tutorial connects two layer-2 switches through a wireless link. Excellent setup when needing to connect a remote location and cabling is not an option.
See related link to open PDF, or go to:
http://www.angelcool.net/tutorials/cisc ... _Setup.pdf
[ view entry ] ( 1167 views ) | print article | related link
The goal of the tutorial is to allow NATed and Internet hosts to use a public IP to access the NATed development server, fixing DNS issues.
Click the link to see tutorial.
http://www.angelcool.net/tutorials/cisc ... rk_NVI.pdf
[ view entry ] ( 1417 views ) | print article
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |